| Deposit | Description | 4 Hours | Daily | Weekly | Monthly | ||
| ELECTRIC HAND TOOLS | |||||||
| 50 | 3/8” Drill | 12 | 48 | 72 | |||
| 80 | ½” Drill | 15 | 20 | 80 | 200 | ||
| 80 | ½” Hole Hawg Drill | 15 | 20 | 80 | 240 | ||
| 60 | 4 ½” Angle Grinder | -- | 15 | 60 | 120 | ||
| 100 | 7” Angle Grinder (w/o disk) | 15 | 25 | 100 | 300 | ||
| 160 | 7” Angle Grinder with Dust Shield | 25 | 40 | 160 | 420 | ||
| 50 | Diamond Cup Wheel ($1.00/1000”) $15 minimum + wear | ||||||
| 60 | 7” Car Polisher/Sander | 10 | 15 | 60 | 180 | ||
| 60 | Router (w/o bits) | 15 | 20 | 60 | 180 | ||
| 100 | 3” x 21” Belt Sander (w/o bits) | 15 | 25 | 95 | 200 | ||
| 80 | Orbital Sander (5” Round) | -- | 20 | 80 | 160 | ||
| 80 | Multimaster | 12 | 20 | 60 | 180 | ||
| 30 | Laminate Trimmer (w/o bits) | -- | 10 | 25 | 75 | ||
| 10 | Laminate Bit | -- | 5 | 15 | 45 | ||
| 70 | ½” Impact Wrench | 10 | 15 | 60 | 180 | ||
| 70 | Electric Metal Shears | 15 | 20 | 60 | 180 | ||
| (18 gauge max) | |||||||
| 80 | Nibbler | 20 | 25 | 75 | 225 | ||
| (cutter for corrugated up to 1/16” max) | |||||||
| SHIP AUGER BIT CHARGES - Wood | |||||||
| 20 | 5/8” X 17” | -- | 4 | -- | -- | ||
| 20 | 1” X 17” | -- | 5 | -- | -- | ||
| 20 | ¾” X 17” | -- | 4.50 | -- | -- | ||
| 20 | 1 ½” X 17” | -- | 6 | -- | -- | ||
| DIAMOND HOLE SAWS – Masonry or Stone | |||||||
| 130 | 1 3/8” | -- | 15 | -- | -- | ||
| 130 | 1 1/2” | 15 | |||||
| SURVEYING/MEASURING EQUIPMENT | |||||||
| 180 | Laser Level (tripod, rod and level) | 40 | 60 | 180 | 540 | ||
| 40 | Wall Mount for laser level | -- | 10 | 40 | 120 | ||
| 160 | Builders Level (tripod, rod and level) | 25 | 40 | 160 | 360 | ||
| 40 | Rolling Measuring Wheel | 15 | 40 | 100 | |||
| 8 | |||||||